Factory Five Racing

Frame:

Complete jig-welded tube frame, 95” wheelbase chassis. Includes all mounts ready to accept small block Ford 302, 351, and 5.0L Coyote engines.

• Optional powdercoated in gloss black
• Includes full roll cage and SCCA style rear crossbar in cockpit

Body:

Hand laid 3/16” laminate composite body includes hinged nose, main rear clip and doors with hinged glass rear window. Made with high quality vinylester resin.
• Driver and passenger doors with molded door liners and DOT door latches
• Front nose section with hinge kit. Includes gas strut piston supports, fasteners and under nose body mount supports
• Original style molded-in hood scoop and fog light recesses
• Rear main body section comes with separate rivet-on rear spoiler
• Optional style scoops and footbox vents
• Includes secondary body fasteners
• Adhesive backed foam weatherstrip
• Body mount fasteners
• Engine bay and rear trunk area seal, push on rubber bulb seal
• Rubber hood and hatch bumpers
• Includes adjustable door hinges/latches
• Includes an opening vintage rear hinged glass window and struts
• Includes glass front windshield (DOT safety glass windshield and hatch)
• Includes air scoops

Chassis Aluminum Panels:

Includes over 20 precision CNC cut, pre-formed 6061-T6 aluminum panels for cockpit (floors, trans cover, and footboxes), rear trunk area, and engine bay/ firewall/ splash guards.
•1,200 pre-packaged rivets: 1/8” and 3/16” short and long
• Complete cockpit aluminum with pre-formed footboxes, floors and transmission tunnel. Includes speedo cable block-off plate and trans harness block off plates. Also includes aluminum dash with cut-outs.
• Engine bay aluminum assembly with aluminum radiator duct surrounds and splash guards
• Complete aluminum trunk area

Complete Front Suspension:

Unequal length control arms with coil-over shock suspension. Comes complete with all parts and fasteners.

• KONI™ brand high performance mono-tube, rod-end shock absorbers
• Coil-over kit for KONI™ shocks including spring hat, threaded seat and 500lb. black powdercoated springs
• Adjustable upper control arms with ball joints and fasteners
• Lower tubular control arms with ball joints and fasteners
• Grade-8 mounting hardware
• FFR forged steel spindles with fasteners

Rear Suspension:

High-end 3-link deluxe rear suspension is standard on complete kits. Designed to be used with Ford 8.8” rear solid axle. Comes with all fasteners and hardware required.

• FFR Deluxe 3-Link suspension kit with rear-end brackets, upper link kit, fasteners, including panhard bar kit with rod-ends and grade-8 fasteners
• KONI™ brand high performance mono-tube, rod-end shock absorbers
• Coil-over kit for KONI™ dampers including spring hat, threaded seat and 350lb. black powdercoated springs
• Factory Five forged aluminum rear lower control arms, with polyurethane bushings and fasteners

Or select our 2015 Mustang independent rear suspension option includes:

• Welded tubular steel IRS frame
• Upper and lower control arms with bushings, grease fittings, and fasteners, powdercoated gloss black
• Left and right IRS toe adjustment arms with rod ends and fasteners, powdercoated gloss black
• KONI coil-over shocks with coil-over kit, springs, and fasteners
• Right and left CV axles
• Rear wheel studs
• IRS e-brake cable adapter
• Differential mounting components, bushings, and fasteners
• Driveshaft adapter for manual cast iron center section

Brake Kit:

• Front hubs, fasteners and dust covers
• Front Brakes, Ford Mustang GT 11” front rotors with twin piston PBR aluminum calipers, brake pads & fasteners
• Master cylinders (listed in pedal box assembly), stainless braided front brake lines with mount clips, banjo bolts and brake line mounting fasteners
• Pre-flared 3/16” brake lines and brake line T-adapter
• OEM Ford emergency brake handle, fasteners

Complete Steering System:

Complete steering system using 15:1 manual rack from tie rod ends and fasteners to vintage steering wheel and badge. Collapsible design.

• 15:1 Aluminum manual steering rack with inner and outer tie rod ends and fasteners
• Polyurethane steering rack bushings and fasteners
• Steering rack shaft adapter 9/16”-26 spline and lower steering shaft
• Upper steering shaft, spring washers and fasteners
• 14” Vintage wood and aluminum steering wheel with boss and FFR center section and fasteners
• Steering bearings and hardware, including 1” flange bearing, pillow block bearing and fasteners

Complete Fuel System/Parts:

Based on OEM Ford Mustang fuel tank and system, this assembly provides everything from the gas cap to the lines, and is designed to work with carbureted or fuel injected systems. External fuel pump required.

• OEM Ford fuel tank with mounting straps and hardware, vents, gaskets, pick-up and fuel level sending unit
• Fuel lines, flex lines, unions and barb connectors and filler neck
• Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high press flex lines and fasteners
• Aston LeMans style polished aluminum fuel cap with integral plastic OEM style pressure cap, gaskets, ground strap, fuel hose to tank extension with fasteners
• Fuel filter, connectors and hose clamps

Complete Cooling System/Parts:

Electric cooling fan, thermostat, relays and mounting kit with hardware. Cooling system also includes stainless steel radiator hoses, and all necessary fasteners.

• Electric cooling fan, high flow 16” puller, with mounting kit and connectors
• Aluminum radiator, in-line filler neck, and pressure cap
• Radiator mount kit and fasteners
• Stainless Steel radiator hose kit incl. adapter kit, fasteners and hose
• Overflow tank with cap, hoses, hose clamps and mounting hardware
• 185 degree thermostat switch and wiring

Misc. Engine Accessories/Side Exhaust:

Exhaust/Mounts: The Type 65 base kit is configured to accommodate the Ford 289, 302, 351W, or 5.0L Coyote engines. Kit comes with alternate drive pulley assembly, oil filter relocate kit, and exhaust assembly to adapt Mustang engine and headers to vintage side exit exhausts.

• J-pipes side exhaust, bare steel with rubber hanger brackets, gaskets and fasteners
• Air filter, conical
• Custom length fan belt
• Universal accelerator cable assembly includes cable, return spring and retainer

Driveshaft:

The Coupe kit allows you to select from several available driveshafts with fasteners to match the engine/trans of your choice. Select one of the following:

• 28 spline driveshaft for 302/351W with T-5 transmission
• 28 spline driveshaft for 2015 IRS, 302/351W with T-5 transmission
• 31 spline driveshaft for 2015 IRS, 5.0L Coyote with 6-speed transmission
• 31 spline driveshaft for 5.0L Coyote with 6-speed transmission
• 31 spline driveshaft for 5.0L Coyote with TKO transmission
• 31 spline driveshaft for 302/351W with TKO transmission
• 31 spline driveshaft for 2015 IRS, 302/351W with TKO transmission
• 31 spline driveshaft for 2015 IRS, 5.0L Coyote engine with TKO transmission
• 31 spline driveshaft for 302/351W with 6-speed transmission

Gauges, Dash, and Electrical Assembly:

End those wiring harness woes, integrated harness and electronic gauges are just the start of this massive assembly. Choose from vintage/replica or modern/performance gauges to complement an authentic Coupe style dash. Complete assembly comes with aluminum dash, dash button, indicator lights, switches, and horn.

• Type 65 Coupe style aluminum dashboard with fasteners
• Custom fit chassis wiring harness
• Ignition switch, headlight switch, 3-position turn signal switch, starter solenoid and horns
• Red, green, blue indicator dash lights
• Wiring harness mounting kit and hardware incl. Fuse panel mount
• On/off switch, horn button, flasher and connectors
• Battery ground strap

Complete set of 6 Autometer brand electronic gauges, with connectors, terminals and installation kit. Includes the following gauges:

• Speedometer
• Tachometer
• Oil Pressure Gauge
• Water Temperature Gauge
• Fuel Level Gauge
• Voltmeter

OR select optional:

Complete set of 7 vintage FFR Replica gauges with connectors, terminals
and installation kit includes:

• GPS Speedometer, reverse read
• Tachometer
• Oil Pressure Gauge
• Water Temperature Gauge
• Fuel Level Gauge
• Voltmeter
• Clock

Interior Accessories:

The 65 Coupe kit comes with all the interior accessories you need. Authentic seats, door latches, toggles, rear view mirror, and more complement the dash and gauges assembly for a full interior that is period correct. Check out this full list of standard parts and assemblies.

• Authentic design Coupe bucket seats, black vinyl with fasteners
• 5-point Simpson brand harnesses
• Steel inner door frames and door handles, hinges, latches and leather check straps
• Emergency brake boot, black vinyl
• High-quality fabric headliner
• Authentic interior rear view mirror with fasteners
• 7 piece electronic gauge assembly
• Stainless steel shifter handle, shift knob, boot, polished ring and fasteners

Exterior Accessories and Lighting:

Along with the goodies on the inside of the car, the Coupe is period correct on the outside. Check out the standard exterior accessories that come with the complete Coupe kit.

• Gas struts for tilt nose and rear hatch
• Authentic license plate light and bracket with fasteners
• High quality laser-cut aluminum mesh vents for nose/sides and rear brake ducts on tail
• Ceramic FFR nose badge
• Polished side view mirror, original style
• Original style headlamps (DOT) with buckets, halogen headlamps, trim rings, wiring pigtail, adjustment screws and fasteners
• Lexan headlight covers and fasteners
• Lexan rear 1/4 side windows and fasteners
• Front turn signals, original style small amber indicators
• Rear turn signals, red LED rear tail-lights

Electrical Parts and Assemblies:

• Battery tray, J-bolts, cables and hold-downs with fasteners
• Battery cable, pre-cut, pre-assembled 4-gauge positive cable with terminal covers
• Insulated line clip hardware and fasteners
• Cable ties, wire loom and flex grommeting

Complete Pedal Box Components:

Leaving the Mustang pedal box behind, the complete Coupe kit utilizes a Wilwood brand pedal box with fasteners and all the required parts
• Wilwood pedal box and hardware
• Master Cylinders clutch quadrant, clutch cable, firewall cable adjuster, fasteners
• Accelerator pedal and accelerator cable. return spring and ball stud retainer

Fasteners:

More than 1,500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners, numbered and packed by assembly.

Type 65 Coupe Assembly Manual:

Bound assembly manual that is over 200 pages long.